Flexible Powerhouses for Professional Use!
The active speakers of the Concert series are perfect for professional applications. Inside the plastic housing with textured finish is a high-resolution 2-way system powered by two separate amplifiers. Two input channels, a Bluetooth® receiver, and especially the DSP presets deliver an outrageously powerful sound and versatile options.
8" Speaker with 1.0" Compression Driver
In the sturdy housing, the two drivers are powered by two separate amplifiers. The 8-inch woofer receives an RMS power of 150 watts, while the tweeter is supplied with 50 watts. This results in a clear, powerful sound image with outstanding presence.
Connection Options
The first of the two channels features an XLR/TRS combo jack, allowing both line signals and direct operation with dynamic microphones. The second channel is for wired use of devices like laptops and MP3 players via 3.5 mm jack or RCA. A third input is a Bluetooth® receiver, so music can also be streamed from smartphones and tablets to the speaker.
DSP Presets
In the "Speaker Mode" section, the speaker’s sound can be easily adjusted to the respective application:
- PA: The default setting, where all frequencies are reproduced evenly.
- Monitor: Designed for use as a floor monitor. In this setting, the bass is slightly reduced while the highs are boosted.
- Sub: Lowers the low frequencies. Useful when an additional subwoofer is used without a crossover.
- Speech: Boosts the frequency range of the human voice for a clear, intelligible sound image.
Mix Out Output
The switchable XLR output allows the summed signal to be sent to another speaker in "MIX" mode, while in "CH 1" mode only the signal from channel 1 is output. This lets you, for example, loop a signal (e.g., right channel or monitor 2) to a second speaker while muting it on the first speaker.
Status LEDs and Power Supply
Three LEDs on the right side indicate whether mains voltage and signal are present. The third LED shows if the integrated limiter is active, which protects the multifunction speaker from distortion and damage. A special feature is the professional power management: an additional power output supplies other devices with voltage up to a current of 7 amperes.
Stable, Loud, and Reliable!
Features
- Type: 2-Way Bi-Amp
- Frequency Response: 70 Hz - 20 kHz
- Sensitivity (1m/1W): 91 dB
- Impedance: 4 Ohm
- Woofer: 8" (203 mm)
- Tweeter: 1.0" Compression Driver
- SPL: 117 dB
- DSP: 48 kHz / 24 bit
- Distortion: ≤0.05%
- Amplifier: Class D
- Power (RMS): LF 150W + HF 50W
- Power (Peak): LF 300W + HF 100W
- Power input and output
- Frequency Band (Bluetooth®): 2401.418 - 2480.498 MHz
- Crossover Frequency: 2.3 kHz
- Durable Plastic Housing with "Rugged Touch" Textured Finish
- 2 Carry Handles (side)
- Black Metal Protective Grille
- Dimensions (WxHxD): 29 x 47 x 26.5 cm
- Weight: 11.3 kg each
Scope of delivery
- 2 x Pronomic C-208 MA 8" Active Speaker
- 2 x Power Cables
Suitable accessories (Not included in the delivery.)
Specification
- Product number 00066490
- Weight in kg 11,3
- Power RMS (Watts) 400
- Multifunctional chassis Yes
- Speakers mid range -
- Colour Black
- Tweeters 1 Zoll
- Microphone input Yes, without phantom power
- Outputs PowerCon, XLR
- Subwoofers 8 Zoll
- Speakers full range -
- Inputs 3.5mm Stereo-Klinke, 6.3mm Klinke, Bluetooth, Cinch / RCA, PowerCon, XLR
Reviews
| 5 Stars |
|
14 |
| 4 Stars |
|
6 |
| 3 Stars |
|
0 |
| 2 Stars |
|
0 |
| 1 Star |
|
0 |
A verification of the ratings has taken place as follows: Only customers who are registered in our online store and have actually purchased the product from us can submit a rating for the item in the customer account.
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
We use them for training in our sports hall.
The 3 inputs are exactly what we need:
"the first of the two channels is equipped with an XLR/jack combo socket, which allows the use of line signals as well as direct operation with dynamic microphones. The second channel is for wired use of e.g. laptop and MP3 player via 3.5 mm jack or RCA. A Bluetooth® receiver is available as a third input so that music can also be streamed to the speaker from smartphones and tablets."
This gives us Bluetooth or cable input and the option of also connecting a headset.
It takes some getting used to:
- The volume control for Bluetooth is not next to the control button for Bluetooth --> operation confusing (who came up with that?)
- The power supply cable does not have a standard IEC plug but a "Powercon" connection and is quite short
- The box has a slight noise when idle. This is not a production fault, but is due to the power amplifier design
All in all, however, a recommendation to buy.
If you want a little more power, you can go for the bigger brothers of this speaker.
This rating has been translated automatically. Original language
A ground lift switch would be nice, because if the mixer and box are on separate circuits, it may hum. Thus, a DI box must still be in between.
The Power-Con connection (input and output) is very good - but the included cable is a joke with a length of less than 1.5m: The boxes are mounted on a speaker stand and the Schuko plug hangs in the air. Someone has probably planned past the practicality, but longer cables are fortunately easy to get - it's just a pity that 1m cable (value of goods under 1, - €) is saved.
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 22,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 28,75 € per month
- More information on financing
