Flexible Powerhouses for Professional Use!
The active speakers of the Concert series are perfect for professional applications. Inside the plastic cabinet with textured finish sits a high-resolution 2-way system powered by two separate amplifiers. Two input channels, a Bluetooth® receiver, and especially the DSP presets deliver outrageously powerful sound and versatile options.
10" Speaker with 1.0" Compression Driver
In the sturdy cabinet, the two drivers are powered by two separate amplifiers with solid output. The 10-inch woofer receives an RMS power of 150 watts, while the tweeter is supplied with 50 watts. This results in a clear, powerful sound image with outstanding presence.
Connection Options
The first of the two channels features an XLR/TRS combo jack, allowing both line signals and direct operation with dynamic microphones. The second channel is designed for wired use of devices like laptops and MP3 players via 3.5 mm jack or RCA. A third input is a Bluetooth® receiver, enabling music streaming from smartphones and tablets directly to the speaker.
DSP Presets
Under "Speaker Mode," the speaker’s sound can be easily tailored to the specific application:
- PA: The default setting, where all frequencies are reproduced evenly.
- Monitor: Designed for use as a floor monitor. In this setting, bass frequencies are slightly reduced while highs are boosted.
- Sub: Cuts low frequencies. Useful when an additional subwoofer is used without a crossover.
- Speech: Boosts the frequency range of the human voice for a clear, intelligible sound.
Mix Out Output
The switchable XLR output allows the summed signal to be sent to another speaker in "MIX" mode, while in "CH 1" mode only the signal from channel 1 is output. This lets you, for example, pass a signal (e.g., right channel or monitor 2) to a second speaker while muting it on the first.
Status LEDs and Power Supply
Three LEDs on the right side indicate whether mains power and signal are present. The third LED shows if the built-in limiter is active, protecting the multifunction speaker from distortion and damage. A special feature is the professional power management: an additional power output supplies other devices with up to 7 amps of current.
Stable, Loud, and Reliable!
Features
- Type: 2-Way Bi-Amp
- Frequency Response: 65 Hz - 20 kHz
- Sensitivity (1m/1W): 92 dB
- Impedance: 4 Ohm
- Woofer: 10" (254 mm)
- Tweeter: 1.0" Compression Driver
- SPL: 118 dB
- DSP: 48 kHz / 24 bit
- Distortion: ≤0.05%
- Amplifier: Class D
- Power (RMS): LF 150W + HF 50W
- Power (Peak): LF 300W + HF 100W
- Power Input and Output
- Frequency Band (Bluetooth®): 2401.418 - 2480.498 MHz
- Crossover Frequency: 2.3 kHz
- Durable Plastic Cabinet with "Rugged Touch" Textured Finish
- 3 Carry Handles (2x sides, 1x top)
- Black Metal Protective Grille
- Dimensions (WxHxD): 34 x 53.5 x 32 cm
- Weight: 14.8 kg
Scope of delivery
- 2 x Pronomic C-210 MA 10" Active Speaker
- 2 x Power Cables
Suitable accessories (Not included in the delivery.)
Specification
- Product number 00066488
- Weight in kg 14,8
- Power RMS (Watts) 400
- Subwoofers 10 Zoll
- Microphone input Yes, without phantom power
- Colour Black
- Multifunctional chassis Yes
- Speakers full range -
- Outputs PowerCon, XLR
- Tweeters 1 Zoll
- Speakers mid range -
- Inputs 3.5mm Stereo-Klinke, 6.3mm Klinke, Bluetooth, Cinch / RCA, PowerCon, XLR
Reviews
| 5 Stars |
|
16 |
| 4 Stars |
|
6 |
| 3 Stars |
|
0 |
| 2 Stars |
|
0 |
| 1 Star |
|
0 |
A verification of the ratings has taken place as follows: Only customers who are registered in our online store and have actually purchased the product from us can submit a rating for the item in the customer account.
This rating has been translated automatically. Original language
What can I expect for this price ?
I am very satisfied.
The sound is good.
Processing very good .
No Proplem with Bluetooth, works well.
Gladly again.
This rating has been translated automatically. Original language
Several connection options up to the direct connection of microphones for presentations or birthdays open up many application variants.
It would be nicer if Bluetooth reception was possible simultaneously on both speakers as a stereo signal, so the music only ever comes from one channel.
Otherwise, they make a well-made and stable impression, but can still be lifted by one person on the speaker stand, with the old Zeckboxen we always had to do it in pairs.
All in all: purchase recommendation, unless you are HiFi fetishists, then just buy a Bose system for your living room!
Variant Pronomic C-212 MA 12" Active Speaker 2000 Watt Stereo Set
This rating has been translated automatically. Original language
1. Unfortunately, you can't get a stereo signal to both speakers via Bluetooth. If it does work somehow, it's not clear from the manual. This is actually irrelevant when using a band, as you always have a mixing console for such purposes. 2. The protective covers lack an upper, central recess to access the upper transport handle, which would make transport much easier.
3. The included power cables are a joke, with a length of only about 1 m. If you have the speakers on a tripod, the 230V extension connector hangs in the air. This is a shame, as for an extra charge of about €5, they could certainly include a cable of at least 2 m.
Variant Pronomic C-208 MA 8" Active Speaker 400 Watt Stereo Set
This rating has been translated automatically. Original language
Variant Pronomic C-215 MA 15" Active Speaker 2000 Watt Stereo Set
This rating has been translated automatically. Original language
Good product at a reasonable price
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 20,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 34,08 € per month
- More information on financing
