The hotline is currently not manned. You can reach us again on Tuesday, 01.09.2026 at 09:30.
Powerful Hybrid Amplifier for Demanding Hi-Fi!
The Advance Paris A12 Classic is a powerful hybrid integrated amplifier that blends the tonal character of a tube preamp with the high power reserve of a modern dual-mono Class-AB power stage. Two ECC81/12AT7 vacuum tubes work in the preamp section while the power amp delivers up to 2 x 280 watts into 4 ohm or 2 x 190 watts into 8 ohm. High Bias, HDMI-ARC, HDMI audio, Phono MM/MC, balanced XLR connections, a TI PCM1796 DAC and an asynchronous XMOS USB-B input make the A12 Classic a versatile control center for high-quality stereo and high-end audio systems.
Hybrid Technology with Tubes and a Powerful Dual-Mono Power Stage
The A12 Classic purposefully combines two amplifier technologies. ECC81/12AT7 tubes handle signal processing in the preamp, while the powerful Class-AB power stage is built on a dual-mono topology. Two 300 VA toroidal transformers ensure stable power delivery. The stereo amplifier provides 2 x 190 watts into 8 ohm and 2 x 280 watts into 4 ohm, making the integrated amplifier suitable for demanding passive Hi-Fi speakers and larger stereo setups.
High Bias for Class-A Operation at Low Output
Advance Paris’s characteristic High-Bias circuit lets the amplifier operate in the Class-A region at lower output levels. When more power is needed, the Class-AB stage takes over. High Bias can be switched on or off at the rear panel, allowing flexible tuning to speakers, listening habits and use cases.
High-Quality DAC and Digital Hi-Res Inputs
For digital sources the A12 Classic uses a Texas Instruments PCM1796 digital-to-analog converter with a maximum specified resolution of 24 Bit / 192 kHz. The asynchronous USB-B audio input uses XMOS technology and supports playback of high-resolution files including DSD. Additionally, three coaxial digital inputs (75 ohm cinch), three optical Toslink inputs and a balanced AES/EBU input (110 ohm) are available. USB-A also supports playback of audio files in formats such as MP3, WMA, WAV, FLAC and AAC.
HDMI-ARC and HDMI Audio for Modern AV Sources
With HDMI-ARC the hybrid amplifier can be conveniently connected to a compatible TV, allowing volume control via the TV remote in many setups. An additional HDMI audio input suits video and audio sources and lets you integrate the A12 Classic into modern entertainment systems without needing a traditional AV receiver.
Phono MM/MC, XLR and Flexible Analog Connections
Analog sources are comprehensively supported. In addition to cinch AUX inputs there are two balanced XLR inputs and an integrated phono preamp for MM and MC cartridges. For MM systems the input capacitance is selectable between 100 pF, 200 pF or 320 pF. Pre-Out, balanced preamp output, Amp-In and Rec-Out expand the amplifier’s flexibility even further.
Subwoofer Management and Two Speaker Pairs
Two outputs for active subwoofers provide built-in bass management with selectable crossover frequencies of 75 Hz or 125 Hz. Two speaker pairs can also be connected, making the A12 Classic suitable for classic stereo systems as well as more elaborate Hi-Fi setups with active bass reinforcement.
Flexible Headphone Amplifier and Convenient Controls
Headphone connections include a 3.5 mm and a 6.35 mm jack. Output impedance can be set between 0 ohm and 100 ohm, while gain options of +6 dB, 0 dB and -4 dB are available. Tone controls for Low, High and Loudness, a bypass function and balance control allow individual tailoring. The two characteristic blue VU meters and the visible tubes emphasize the A12 Classic’s distinctive technical presence.
Optional Bluetooth and Practical System Features
The amplifier provides a connector for the optional Advance Paris Bluetooth modules X-FTB01 and X-FTB02 for wireless streaming. An automatic standby function can be disabled or set to 30, 60 or 90 minutes. Two 3.5 mm trigger outputs also simplify control of other compatible Hi-Fi components.
Discover Powerful Hybrid Technology for Your Hi-Fi System with the Advance Paris A12 Classic!
Features
- Hybrid stereo integrated amplifier
- Dual‑mono Class‑AB power stage
- High‑Bias circuit
- Tube preamp
- 2x ECC81/12AT7 tubes
- 2x 300 VA toroidal transformers
- Power at 4 ohm: 2x 280 W
- Power at 8 ohm: 2x 190 W
- Distortion: <0.007 %
- Frequency range: 10 Hz - 50,000 Hz
- Signal‑to‑noise ratio: at least 103 dB
- Channel separation: >75 dB
- 4x AUX cinch L/R
- 2x AUX XLR L/R
- Phono MM
- Phono MC
- MM capacitance: 100 pF / 200 pF / 320 pF
- Amp‑In: cinch
- Pre‑Out: cinch L/R
- Preamplifier output: XLR L/R
- Rec‑Out: cinch L/R
- 2x subwoofer outputs with bass management
- Subwoofer frequency: 75 Hz / 125 Hz
- 2 speaker pairs connectable
- Headphone jack: 3.5 mm
- Headphone jack: 6.35 mm
- Headphone output impedance: 0 / 100 ohm
- Headphone gain: +6 dB / 0 dB / -4 dB
- 3x coaxial digital input, 75 ohm cinch
- 3x optical Toslink digital input
- 1x AES/EBU digital input, 110 ohm XLR
- Asynchronous XMOS USB‑B audio input
- USB‑A audio input
- USB‑A for firmware updates
- USB‑A audio: MP3, WMA, WAV, FLAC, AAC
- HDMI‑ARC
- HDMI audio
- DAC: Texas Instruments PCM1796
- Maximum DAC resolution: 24 Bit / 192 kHz
- DSD playback via USB‑B
- Connector for optional Bluetooth module
- Compatible with optional X‑FTB01 / X‑FTB02
- 2x 3.5 mm trigger output
- Tone controls for Low and High
- Loudness function
- Tone control with bypass
- Balance control
- Logarithmic VU meters
- Auto standby can be disabled
- Auto standby: 30 / 60 / 90 minutes
- IR remote control
- Detachable power cable with C15 connector
- Maximum power consumption: 600 watts
- Power consumption in standby: 0.5 watt
- Dimensions (W×H×D): 431 x 193 x 460 mm
- Weight: 18 kg
Scope of delivery
- 1 x Advance Paris A12 Classic hybrid integrated amplifier
- 1 x IR remote control
- 1 x detachable power cable
Suitable accessories (Not included in the delivery.)
Specification
- Product number 00122165
- Power (Watts) 560
- With remote control Yes
- Colour Black
- Configuration 2.0
- Outputs 3.5mm Stereo-Klinke, 6.3mm Klinke, Cinch / RCA, Klemmanschlüsse für Lautsprecher
- Amplifier class Class A/B
- Inputs AES/EBU (XLR), Cinch (digital), Cinch / RCA, HDMI, Optisch, USB, XLR
Reviews
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 56,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 207,50 € per month
- More information on financing
| 3 Year warranty | |
| 30 Day Money Back | |
| Price Match Guarantee | |
| Over 2.000.000 satisfied customers |
The hotline is currently not manned. You can reach us again on Tuesday, 01.09.2026 at 09:30.
| Monday | 09:30 - 18:00 | |
| Tuesday | 09:30 - 18:00 | |
| Wednesday | 09:30 - 18:00 | |
| Thursday | 09:30 - 18:00 | |
| Friday | 09:30 - 18:00 | |
| Saturday | 09:30 - 13:30 |





