The hotline is currently not manned. You can reach us again on Wednesday, 20.05.2026 at 09:30.
The Perfect Mix of Power and Precision!
With a powerful 500-watt amp and custom Eminence speakers, the Infinity Combo series is perfect for modern bassists. Thanks to its user-friendly controls and cloud-storable presets, you can switch between tones on the fly. Its tonal versatility makes it ideal for live gigs and rehearsals across genres.
Top Panel Features
Input
Plug your instrument into this jack using a standard 6.3 mm (1/4") TS cable.
Headphone Output
Plug in your headphones and enjoy an IR emulator that simulates your cabinet sound.
Preset
Press the Preset button to switch between Presets 1–5 and a bypass signal. Hold the button to save the current preset.
Input
Controls the analog input gain. Press to enable/disable the effects loop for the preset.
Comp
Controls dynamic compression; make-up gain is applied automatically. Press to cycle compressor positions: OFF/Pre/Post Drive.
Drive
Controls the gain of the selected drive mode. Press to choose between OFF/Leo Bass/Vintage Microtubes/Microtubes B3K/Alpha·Omega. Press and hold to adjust the noise gate threshold.
Tone
Adjusts the drive tone/octaver filter. Press to select which knob is active.
Level
Controls the drive level/tweeter level. Press to select which knob is active.
Blend
Controls the blend between Drive and Octaver. Press to choose which knob is active.
Preset
Controls preset volume. Press to toggle between the 7 IR slots/IR bypass for Post DI & headphone output.
Graphic EQ Section
Preset-specific Darkglass EQ. ±12 dB at Low Shelf/250 Hz/500 Hz/1.5 kHz/3 kHz/High Shelf.
Master
Controls the overall volume of the speaker and headphone outputs. Press to mute the sound and activate the tuner. Press and hold to pair via Bluetooth (Audio + Suite).
Darkglass Suite
The Infinity Combo ships with five versatile factory presets. You don't have to use the Darkglass Suite with the Infinity Combo, but we highly recommend it!
The Darkglass Suite gets the most out of your Infinity Combo by giving you an interface to tweak the signal chain for each preset.
With the iOS or Android version of Darkglass Suite, you can create, edit, share and apply presets.
Rear Panel
AC Power Switch
Turn the combo on.
AC Inlet
Plug the power cord in here to power the amp. 100–230 VAC, 50–60 Hz. Set the voltage selector to the correct position before you turn the amp on!
MIDI In
Standard DIN connector. Use the 7-pin MIDI connector only with the Darkglass MIDI footswitch; use a 5-pin plug for other MIDI devices.
USB
The USB-C port enables the combo's USB audio interface functions and connects to the Darkglass Suite. USB MIDI In/Out is supported as well.
Post DI Out
Use this output to send your signal to a mixing console, mic preamp, interface, etc. This output delivers the processed signal with or without IR.
Ground Lift
Use this switch to lift the ground on the XLR outputs. If you hear hum in your DI signal, try toggling it.
Pre DI Out
Use this output to send your signal to a mixing console, mic preamp, interface, etc. This output delivers the unprocessed signal.
Line Out
Use this output to send your signal to the line input of a console, interface, etc. This output delivers the processed signal without IR. You can also daisy-chain multiple combos via this output!
Line In
This input accepts +4 dBu line-level signals from an amp modeler, keyboard, etc. Use this input when connecting Darkglass combos together.
Send
Use this output to send the signal to your outboard gear.
Return
Use this input to receive the signal from your outboard gear.
External Speaker
Use this connector to connect the amp to an external speaker cabinet. The SpeakON combo jack accepts SpeakON or 1/4" speaker cables. Minimum load impedance is 8 O. Minimum rated power must be 250 watts.
Features
- Speakers: 2x 10" Custom Design Eminence Speakers
- 5 Preset Slots
- Continuous push-rotary knobs for extra functions
- Compressor, Octaver and Tuner
- Controllable via Darkglass Suite app
- Horn: WGS-410
- Power: 500 Watts RMS
- Graphic 7-Band Equalizer
- 2x DI Out (XLR)
- Effects Loop
- Line Out
- Dimensions (W x H x D): 46.4 x 61.1 x 39.5 cm
- Weight: 17 kg
Scope of delivery
- 1 x Darkglass Infinity 500 Combo 210
Specification
- Product number 00113960
- Colour Grey
- Power (Watts) 500
- additional FX Yes
- Direct Out / Line Out Yes
- Power amplifier Solid State
- Compressor/Limiter Yes
- Wheels included No
- Pre amplifier Modeling
- Speakers 2x 10 Zoll
- Headphone Out Yes
Reviews
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 29,10 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 108,25 € per month
- More information on financing
