Customer ratings for Pronomic MXS-600 Mobile Rack Trolley With 21 Rack Units and Wheels

Recommended

Very good value for money I did not find cheaper, quality side is solid a few flats no assembly instructions but it's pretty easy to understand the symmetry is not perfect, I would have preferred three holes in each unit instead of two, side delivery time should not be hurried damage that your emails are so early in French or German it is the first time I order from you, usually I order from Thomann they have adapted to foreign customers no problem with them, I could recommend you to review the language exchange???? and delivery time thank you very much.

The product meets the requirements I was looking for, indeed superior to other equal purchased from other supplier at the same price. I was very pleased with the quality of the service.

I am really excited! One reads you very often that rack trolleys in this price range are badly drilled / processed, wobbly or can not be properly assembled. Here everything fits the trolley is straight rollers can be adjusted even on uneven ground. The only small drawback would be the lack of assembly instructions. The can not be found anywhere even on the company site itself. However, everything can be assembled with a little logical thinking as easily as any Ikea shelf. Rack devices also fit all pure. I would buy again directly!

The processing is as mentioned not optimal. I had to edit about 30 min (without flex) edges that the assembly was possible. Overall slightly warped, so that 1 wheel - despite loading - does not have permanent ground contact. The interior was protected for shipping in plastic film, so only a few quirks were visible. A few more screws / "nuts" would be helpful to use more than just 2 for HE.
Otherwise: Kirstein is top - everything is fine. Due to P / L I would buy it again.

Good product, but it could be improved, for example by adding 100mm larger casters and by reinforcing the welds of the bolts on which the casters are screwed.
Very fast shipping.

EXCELLENT PRODUCT WITH A VERY AFFORDABLE PRICE
VERY AFFORDABLE I BOUGHT TWO

Positives:
- The rack trolley is solid, holds properly what and looks good assembled and equipped.
- Is well suited for use on stage, or for mobile use.

Negative:
- Unfortunately, a hole was not drilled (left side rear cross brace). Fortunately, I have a stand drill and have re-drilled it myself. Someone who does not have this possibility would have to return the product.
- The supplied wrench has a size between 16 and 17- very inaccurate.
- The rollers have partially rounded nuts (with also not exactly defined size) and were therefore difficult to screw.
- A hole for the foot roller was a little too small, the roller went in only with force.
In combination with round nuts and a key that does not fit exactly a real act to get the rollers pure. Who has its own tool (eg a pipe wrench :) ) will know how to help.

- A construction manual was unfortunately not included. It is all more or less self-explanatory, but would not have been bad.

Regardless of the deducted stars, I would still buy the product again and also recommend it.

clean processing ... all parts complete ... easy to assemble and very stable ... I can only weiteremphehlen
H.W.G

OK GREAT PRODUCT, FAST SHIPPING, GREAT QUALITY AND PRICE.

I am satisfied with Kirstein's services: well-packed material, fast delivery. But Kirstein should ask the manufacturer (probably in China) to apply for welds. They are coarse and sloppy. The whole is painted, but these small defects are visible.
Ask the manufacturer to apply!

Super practical rack trolley. Once assembled, it looks really professional. But until then, one is annoyed about the poor packaging, which leads to the fact that most metal parts are scratched. Rackschien I had to bend also first again straight ;o( One will say to me, with this price ........ but actually a pity. Otherwise it would be "TIP TOP"

Otherwise the Musikhaus Kirstein was really top with the delivery. Ordered on Tuesday, delivered on Wednesday in Luxembourg. That is SERVICE !

I bought this rack trolley to put my mixing desk, a 3u amp, a 1u UHF microphone rack receiver, a 1u rack power strip.
It's perfect, everything fits without any problem.
The trolley is really very solid and the adjustable tilt is very practical.
The shipment was very fast, and the transport was very efficient, despite the 2 successive holidays.
I don't regret my purchase from Kirsten.

The rack trolley is very practical, I use it to install 19" racks in the home studio. Mixer is not installed with. Good that the trolley is on (very good going) wheels, it can be easily moved for cabling. The price-performance ratio is also excellent. For well under 100 € you have otherwise hardly the possibility to install a total of 21 HE.

However, I would have gladly paid 5 € more, if the parts had been reasonably packaged. The individual parts are not connected to each other and rattle around loose in the windy box. Until it arrived with me the cardboard was already quite tattered and the parts almost fell out. Thus, they had also got some quirks and scuffs. Actually a pity. With the damages the car looks a bit cheap. If it would arrive by a better packaging undamaged and thus more valuable to the customer would be the added value higher than the cost. My tip would be first to tie the parts with 3, 4 cable ties together, further for the box choose a more stable material.

Because of the packaging a point deduction.

The trolley comes as mentioned in parts. The assembly is self-explanatory and quite simple. An assembly instruction is not included, I think such would be quite advantageous for less crafty people

The rack cart was super poorly packaged, the individual parts flew around only with a thin film, in the heavily crushed, torn and unstable cardboard. Therefore, quirks, scratches and both rack rails, to which the devices are screwed, were bent. Not enough nuts and bolts....
Many greetings

Rack trolley is easy to assemble, is stable and excellent for studio purposes, built-in devices have enough space and are optimally accessible ! Suggestion: perhaps the manufacturer could supply a custom-fit sheet metal tray for better support of heavier Enstuffen in the floor area!

Am very satisfied with this product. Especially the lockable rollers are a super plus that Konkurenz products in the same price range do not have. First inhibited me the construction without a manual, but who knows something technically creates it "as you go along". Only please note that the lower screws can be tightened only AFTER hooking the folding top, otherwise the holder does not snap.
From the manufacturer only 1 shortcoming (but does not bother me): the folding top is not 100% when I press down (1 cm difference).
Conclusion: only to recommend!

how can you sell such a thing.....no assembly instructions and so you stand there because the upper part does not work properly. Smoke holes rusted .....the last !