Customer ratings for Pronomic BAT-02 T-speaker stand fork for 2 speaker stand adapter

Exactly what I wanted

The supplied double stand is very unstable and for the operation of 2 passive 8 inch tops absolutely not recommended !!!

which I had previously purchased and successfully used. Cool parts!

The fork is very unstable in itself! Have 2 box columns of 9.5 kg each put on, where the span of the fork
was pushed to the minimum of 32 cm. The boxes are gaping apart at the top, indicating,
that the flanged transducers were not welded 100% vertical. The 36mm diameter flange transducer also has plenty of air! The whole construction looks crooked and wobbly. Can only recommend the product for very light boxes!!!

Highly recommended.
Everything very well described.
Shipping was very fast!

Price - performance ratio very good. Have ordered 2 pieces and 2x 16,99€ incl.Versand paid, better gehts not. Easy handling for small light satellites. Tighten toggle screw with feeling, otherwise gibts dents in the tripod. Order and payment process as usual exemplary. Delivery by DPD with announcement immediately.

Quote from my wife: "Well, are you improving again?" Well, is so in the nature of things. Overall, the tripod adapter in black painted steel makes a good impression. Welds are well executed and the tube ends are closed with plastic caps. The stand tubes with Ø 35 mm are designed for standard box flanges (Ø 36 mm) and can be adjusted in the centre distance from approx. 32 to 50 cm and secured with an Allen screw. The Allen screw can be screwed in neatly via a rivet nut fixed in the telescopic tube.
In a review the rivet nut was already mentioned as loose. This can actually only be done by tightening the screw and lock nut yourself, if you don't have the appropriate riveting pliers available.
One end cap of the stand tube had a lateral protrusion, so that the box was a bit difficult to put on ...... was reworked with a cutter knife.
The adapter tube for mounting on a suitable tripod has an inner diameter of 38 mm. The corresponding clamping is done by a M8 tommy screw.
For this was already criticized in an evaluation that thereby the tripod tube is scratched ...... I add still, if necessary is pressed in.
I did not want to try this little game. So first of all I filed the thread end of the toggle screw flat. Since there is some space with the 38 inner Ø of the mounting tube, glue a thin felt glider inside over the clamping screw opening (which still has to be deburred, by the way) and 2 more about 120° offset. Add a second row of felt gliders offset by 60°, again 3 X 120°.
Now the adapter can be pushed onto a tripod with light pressure and without play. The clamping via the tommy screw is now no longer absolutely necessary, but can be used additionally and then presses scratch-free over the felt onto the tube. But here too, tighten a little sensitively, otherwise it pushes through at some point.
Man, so much tinkering with a purchased part that I just want to use directly ???
If you're not that fussy, you just put it in and put up with the scratches.
The tripod adapter is as above a good price - performance ratio.
The K&M tripod adapter has a plastic bushing for the mounting tube in order to avoid the above-mentioned. Here, however, the price is also corresponding.
So, as a conclusion, I would do the rework if the opportunity arises. It's worth it, because the design of the tripod adapter is otherwise OK.

Gladly again.

I did not expect the good quality of the product.
The price performance ratio is OK.
The delivery was also very fast.

Everything ok, the article was really fast with me and looks exactly as it was represented on the net!

TOP :-) for little money!!! for boxes with max. 20 KG

Plastic plugs at the fork ends too loose, easily clogged. Impossible !
Remedy 2 stainless steel sheet metal screws laterally in each plug insert
Pop rivets would also be good etc...
mfg Johannes

The fork does what it should and has a very good price-performance ratio.
The only thing that bothers me is that when you tighten the locking screw, the tripod rod is scratched and vermackt.

Part is not bad for the price. As for the accuracy needed some rework. One of the drive-in nuts was loose. Could however be fixed with superglue.