The hotline is currently not manned. You can reach us again on Wednesday, 20.05.2026 at 09:30.
Digital 2-Channel Wireless Microphone System Set with Practical Charging Case!
A digital complete wireless system offering several key advantages: discreet, easiest operation, lightning-fast setup, extremely compact and portable, and – most importantly – crystal-clear sound and transmission quality. Ideal for videographers of all kinds, YouTubers, vloggers, journalists, and more.
With features like intelligent GainAssist level automation, 32-bit float onboard recording, and a significantly higher maximum sound pressure level of 123 dB, the new Wireless GO delivers uncolored audio. Universally compatible with cameras, smartphones, and computers, it also scores with lockable lavalier connectors and a TRRS jack on the receiver for headphone monitoring or a third microphone signal when connecting a headset.
Safely Transported and Always Fully Charged!
The robust, 10 cm wide zip case covered in textured synthetic leather is ideal for safely storing, transporting, and charging the Wireless GO (Gen 3) system. It offers slots for both transmitters and the receiver. The three modules can be charged simultaneously in the case – both at home and on the go.
Additionally, the USB-C port allows data transfer to and from the computer. This means you can configure the Wireless GO modules via the Rode Central software and transfer backup audio data (WAV) from the transmitters to the computer – all via a single USB cable while the modules remain in the charging case.
The built-in battery capacity is 4200 mAh, allowing two full charges of all three modules. On the back of the case, there is a USB-C port and next to it a charge status LED with a test button.
RØDE - Premium microphones and audio accessories!
Features
- Compatible with camera, smartphone, iPhone, computer
- Two transmitter modules (TX) with built-in condenser microphone
- Receiver module with headset jack for third microphone signal
- Intelligent GainAssist level automation
- Crystal-clear, broadcast-quality audio
- License- and registration-free 2.4 GHz band
- Range: 260 m (line of sight)
- 3.5 mm TRS jack on transmitter for external lavalier microphone
- Threaded jack for securing the Lavalier II
- Maximum sound pressure level: 123.5 dB (internal microphone)
- Frequency response: 50 Hz - 20 kHz (internal microphone)
- 32-bit float recording in transmitter module (over 40 hours)
- Receiver module with LCD display for connection, level, battery, mode
- Receiver (RX) with USB-C port and analog 3.5 mm TRRS jack
- Usable as headphone output, camera output, headset connection
- Power supply: built-in lithium-ion battery for up to 7 hours operation
- System requirements: Windows 10, Mac OS 10.15, Android 11, iOS 14
- Dimensions: 46.5 x 44 x 20 mm (each module)
- Weight: 35 g (transmitter), 36 g (receiver)
- Includes USB 3-way charging hub (SC33)
- Includes 3.5 mm TRS connection cable (SC2) for camera
- Includes USB-C to Lightning cable (SC21) and USB-C to USB-C cable (SC22)
- Includes 3x furry windshields for outdoor recording
- Includes neoprene carrying case
Wireless System
- Transmission: 2.4 GHz band
- Range: up to 260 m (line of sight)
Transmitters TX1/TX2
- Internal microphone: miniature condenser capsule
- Polar pattern: omnidirectional
- Maximum sound pressure level: 123.5 dB SPL (1 kHz @ 1 m)
- Frequency response internal microphone: 50 Hz - 20 kHz
- Input for external microphone: 3.5 mm TRS (mono) with threaded collar for locking nut
- Memory: 32 GB for over 40 hours backup audio recording (WAV)
- Power supply: built-in LiPo battery (up to 7 hours) or USB-C (5 V/0.4 A)
- Dimensions (WxHxD): 46.5 x 44.0 x 20.0 mm
- Weight: 35 g
Receiver
- Level switch (preamp): 0 dB, -12 dB, -24 dB
- Analog connection: 3.5 mm TRRS jack
- Digital output: USB-C
- System requirements computer: Windows 10 or Mac OS 10.15 or newer
- System requirements phone: Android 11 or iOS 14 or newer
- Power supply: built-in LiPo battery (up to 7 hours) or USB-C (5 V/0.4 A)
- Dimensions (WxHxD): 46.5 x 44.0 x 20.0 mm
- Weight: 36 g
Charging Case
- Durable zip case with textured synthetic leather cover
- For charging the three Wireless GO (Gen 3) modules
- Slots for two transmitters (TX) and one receiver (RX)
- Data transfer to and from computer
- Battery capacity: 4200 mAh (2x full charge for all modules)
- USB-C port
- Power requirement: 5 V/3 A
- Charging time: approx. 2 hours
- Charge status LED with test button on the back
- Dimensions: 98 x 71 x 78 mm
- Weight: 185 g
Scope of delivery
- 1 x RØDE Wireless GO (Gen 3) receiver
- 2 x RØDE Wireless GO (Gen 3) transmitters
- 1 x USB 3-way charging hub (SC33)
- 1 x 3.5 mm TRS connection cable (SC2) for camera
- 1 x USB-C to Lightning cable (SC21) and USB-C to USB-C cable (SC22)
- 3 x furry windshields for outdoor recording
- 1 x neoprene carrying case
- 1 x Rode Wireless GO (Gen 3) Charge Case+
Specification
- Product number 00111352
- Wireless transmitter für Kamera, mit Bodypack, mit Lavaliermikrofon
- Frequencies 2.4 GHz (WLAN Bereich)
- Colour Schwarz
Reviews
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 20,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 22,40 € per month
- More information on financing
