Complete Allround PA System for Stage and Events with 2800 Watts!
The new Powerstage series from McGrey offers versatile stage speakers combined with powerful subwoofers, a high-performance amplifier, and other practical accessories. Balanced, rich sound and effortless setup are guaranteed. The highlight of the set is that both tops can be mounted directly on the subwoofers using the included speaker poles, transforming it into a powerful complete system.
Sturdy, felt-covered wooden cabinets ensure absolute stage suitability. To complete the set, matching speaker cables are already included. This allround set is ideal as a PA system for budget-conscious bands and event organizers who want to sound smaller stages and events. The assertive sound of the PA system guarantees good vibes, party atmosphere, and packed dance floors!
Power and Connections
With a total power of 2800 Watts (peak), the McGrey Powerstage-2800 delivers enough power to entertain even larger crowds. The powerful 10" speaker, 2" piezo tweeter, and 15" subwoofer provide excellent signal resolution. To daisy-chain multiple speakers, the boxes feature an input and an output for signal pass-through. IN and OUT are equipped with SPK connectors. The speakers also have 6.35 mm jack connections.
Cabinet and Features
Of course, the McGrey PA system offers all the features you expect from a stage-ready sound system. The solid wooden construction, metal front grille, and robust felt covering not only look great but also reliably protect the speakers from damage. This ensures the McGrey speakers survive wild party nights and frequent transport. For use as a monitor speaker, the top can be tilted thanks to the trapezoid-shaped cabinet. To facilitate positioning and transport, each cabinet has two side handles.
Powerful Amplifier
The amplifier features 2 XLR input jacks for connecting a signal source. Additionally, the two XLR link outputs allow forwarding the input signal to additional amplifiers. Besides the two Speakon-compatible outputs, the screw terminal connections are especially advantageous for fixed installations in bars and clubs. Also on the rear panel are a ground/lift switch (which eliminates potential ground loops) and a mode selector switch (bridge, parallel, or stereo).
Extremely Robust Speaker Pole
The included speaker pole allows the tops to be mounted directly on the subwoofers and adjusted in height as needed. The PA boxes already have the required flange. The pole simply plugs in there. A locking pin secured by a fixing screw ensures the box does not accidentally slip off the pole. The robust steel construction guarantees long life even in the toughest stage environments!
Speaker Cables
To get started right away, the set includes four Pronomic pro-line audio cables. These well-made cables deliver flawless transmission properties and are thus perfect for use on stage or in the rehearsal room. The 2-conductor cables with 2x 1.5 mm² cross-section are equipped with robust Speakon-compatible connectors.
The Powerstage-2800 is the ideal PA system for musicians who want to save money but still don’t want to compromise on quality!
Features
McGrey PA-110 Speaker
- Passive 2-way speaker with piezo tweeter
- 10" (25 cm) speaker, 2" (5 cm) tweeter
- Trapezoid-shaped cabinet
- Power: 50 Watt (RMS), 100 Watt (music power), 200 Watt (peak)
- Impedance: 8 ohms
- Frequency response: 70 - 18,000 Hz
- Speaker flange at bottom
- 2 side handles
- Sturdy wooden cabinet construction
- Felt surface and metal grille
- Connections: SPK In/Out and 6.35 mm jack In/Out
- Dimensions (W x D x H): 380/240 x 290 x 510 mm
- Weight: 10.2 kg
McGrey PAS-115 Subwoofer
- Passive subwoofer
- 15" (38 cm) woofer
- Power handling: 300 Watt (RMS), 600 Watt (music power), 1200 Watt (peak)
- 2 bass reflex ports
- Impedance: 4 ohms
- Frequency response: 45 Hz - 1.5 kHz
- 35 mm speaker flange on top
- 2 side handles
- Sturdy wooden cabinet construction
- Felt surface and metal grille
- Inputs: 6.3 mm jack, SPK
- Outputs: 6.3 mm jack, SPK (top out with 150 Hz HPF)
- Dimensions (W x D x H): 47 x 48 x 58 cm
- Weight: 25 kg
Pronomic TL-200 Amplifier
- Output power (8 ohms): 2x 200 Watt RMS
- Output power (4 ohms): 2x 300 Watt RMS
- Output power (2 ohms): 2x 500 Watt RMS
- Output power (8 ohms bridged): 650 Watt RMS
- Output power (4 ohms bridged): 950 Watt RMS
- Output circuit type: Class AB
- Input impedance: 10 kOhm
- Frequency response: 15 Hz - 25 kHz
- THD: <0.03%
- IMD 60 Hz & 7 kHz, 4:1: <0.038%
- Rise time / speed: 40 V / µsec
- Signal-to-noise ratio: >102 dB
- Damping factor (1 kHz @ 8 ohms): >400:1
- Cooling: Active, temperature controlled
- Protection circuits: DC output protection, long-term overheating control, soft start, intelligent overload protection, clip limiter
- 2x XLR input + 2x XLR thru output
- 2x speaker (SPK) outputs
- 2-channel speaker screw terminals
- Parallel / Stereo / Bridge mode
- Normal / Compress mode (clip limiter)
- Ground / Lift mode
- Sensitivity switch: 1.44V / 1.0V / 0.7V
- Power connection: 230 Volt
- Width: 19 inch (482 mm)
- Height: 2 RU (88.9 mm)
- Installation depth: 440 mm
- Weight: 15.7 kg
Pronomic Speaker Pole
- Steel speaker pole
- For mounting tops on subwoofers
- Simple plug-in version with flange
- Speaker flange diameter: 36 mm
- Height adjustable from 80-137 cm
- Locking pin with fixing screw
- Max load capacity: 40 kg
- Weight: 1.4 kg
- Color: Black
Speaker Cables
- Professional speaker cable
- Connectors: 2x Speakon compatible
- Conductor cross-section: 2x 1.5 mm²
- Jacket color: Black
- Oxygen-free copper
- Flexible and robust outer jacket
- Acid and oil resistant
- Strain relief with clamping sleeve
- Low conductor capacitance
Scope of delivery
- 2 x McGrey PA-110 10/2 Speaker
- 2 x McGrey PAD-115 15" Subwoofer
- 1 x Pronomic TL-200 Amplifier
- 2 x Pronomic Speaker Pole
- 2 x Pronomic pro-line BOXSP1-2.5 Cable with Cable Tie
- 2 x Pronomic pro-line BOXSP1-10 Cable with Cable Tie
Suitable accessories (Not included in the delivery.)
Specification
- Product number 00041781
- Inputs 6.3mm Klinke, XLR
- Configuration 2.2
- With mixing desk/power mixer No
- Power RMS (Watts) 700
- Satellites/Fullrange 10 Zoll/2 Zoll
- Colour Black
- Subwoofers 2x 15 Zoll
Reviews
| 5 Stars |
|
12 |
| 4 Stars |
|
1 |
| 3 Stars |
|
0 |
| 2 Stars |
|
0 |
| 1 Star |
|
0 |
A verification of the ratings has taken place as follows: Only customers who are registered in our online store and have actually purchased the product from us can submit a rating for the item in the customer account.
This rating has been translated automatically. Original language
Will order some items still, depending on demand.
With kind regards
Dj B-Nold
This rating has been translated automatically. Original language
It was all uncomplicated and quickly delivered
Variant McGrey Powerstage-4400 PA System 4400 Watt
This rating has been translated automatically. Original language
More expensive and bigger is always possible.
Nevertheless, this system is more than sufficient for club gigs and open airs with a maximum audience of 150.
Variant McGrey Powerstage-4400 PA System 4400 Watt
This rating has been translated automatically. Original language
Brilliant for a party up to 80 people in a small hall or tent.
For this money absolutely top class!
PA system for smaller stages and events
2x 15" (38 cm) speakers in trapezoidal shape
2x 18" (45 cm) subwoofer
1x power amplifier
2x distance rod (height adjustable from 80-137 cm)
2x 2,5 m Speakon compatible speaker cables
2x 5 m Speakon compatible speaker cables
Gladly again, mega service and competent advice!
Variant McGrey Powerstage-4400 PA System 4400 Watt
This rating has been translated automatically. Original language
Questions about product
Question by Stephan Graepler on 01.06.2021
Is the pa system to be guided via Bluetooth?
Answer by Musikhaus Kirstein:
Unfortunately, no; an appropriate mixer would be needed to operate it, then you could do something with Bluetooth: https://www.kirstein.de/Analoge-Mischpulte/IMG-Stageline-MXR-6.html (The cabling for the mixer would be added).
Question by Wissosn Bernard, piano-composition on 28.09.2020
Hello,
What is the weight (in kg) and dimensions (in cm) of a (passive) speaker?
Same question for 1 subwoofer (passive) ?
What is the weight of the whole (2+2+amp+stands)?
Thank you for your answer.
Thank you for your answer.
Bernie Bernou
Answer by Musikhaus Kirstein:
A passive loudspeaker weighs about 10.2 kg and has the following dimensions: (width x depth x height): 38/24 cm x 29 cm x 51 cm. A subwoofer weighs about 25 kg and has the following dimensions: (width x depth x height): 47 cm x 48 cm x 58 cm.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 20,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 68,25 € per month
- More information on financing
