The hotline is currently not manned. You can reach us again on Monday, 20.07.2026 at 09:30.
The Pronomic MC Series Power Amplifiers Are Designed For Flexible, Mobile Use In Professional Sound Reinforcement Systems!
The MC series excels in every respect. Absolutely dry, crystal-clear and powerful sound, excellent workmanship, reliable protection circuits, a generous cooling system and high power supply reserves are just a few attributes that distinguish this amplifier and make it the first choice for both the demanding musician and for the rigors of professional rental tour work.
Flexible Circuitry
The MC4-600 features a mode selector for each channel that allows operation in stereo or parallel mode. This gives you a very versatile tool for a wide range of applications.
Adjustable Crossover Frequency
The two channel pairs have a selector switch with positions OFF, HPF and LPF. Depending on the speakers used, only the required frequency bands for full-range speakers, subwoofers or tweeters are processed. The crossover frequency is 100 hertz.
All essential protection circuits are of course integrated:
- The power soft-start function prevents overloading the mains when the amplifier is switched on.
- The output DC protection constantly checks whether DC components are present at the speaker outputs and will switch the outputs off if signals are poor. This reliably prevents destruction of speaker coils due to excessive DC components.
- The integrated clip limiter reliably prevents overload of the amplifier. It already prevents DC components from occurring in the circuit at the amplifier stage.
- The sophisticated thermal monitoring and fan control ensure smooth continuous operation under heavy loads.
- Standard protection circuits such as short-circuit protection are, of course, present here as well.
- All protection circuits continuously check whether the fault still exists and immediately release the outputs again as soon as the fault is cleared.
Plenty Of Power For Many Applications!
Features
- Output Power (8 Ohm): 4x 600W RMS
- Output Power (4 Ohm): 4x 900W RMS
- Frequency Response (1W at 8 Ohm): 20 Hz - 20 kHz ±0,5dB
- THD 20 Hz - 20 kHz for 1 W: 0.1%
- Signal-to-Noise Ratio: 103 dB
- Input Impedance: 20 kOhm
- Output Voltage Slew Rate: 40V/s
- Input Connectors: XLR female, 3-pin
- Max. Voltage Gain at 1V Input (8 Ohm): 36.3 dB
- Max. Output Voltage (4 Ohm): 70 V
- Max. Output Voltage (8 Ohm): 70 V
- Output Circuit Type: Class D
- Output Connectors: Speakon compatible, 2-pole
- LED Indicators Per Channel: On, Level, Clip, Protect
- Mains Voltage: 230 VAC/50 Hz
- Dimensions: 480 x 300 x 64 mm (1.5 U)
- Weight: 5.6 kg
- Panel Controls: Mode Select, Crossover
- Cooling: Two fans, airflow from rear to front, temperature-controlled speed
- Protection: Short circuit, overload, soft-start, DC
- Mains cable with IEC power connector
Scope of delivery
- 1 x Pronomic MC-4-600 Amplifier 4x 900 Watt
- 1 x Mains cable
Suitable accessories (Not included in the delivery.)
- Pronomic Stage XFXM-10 Microphone Cable XLR 10 m Black
- Cordial CFY 1.8 WMM XLR Adapter Cable 1.8 m Black
- Pronomic pro-line BOXSP4-10 Speaker Cable Speakon-Compatible 10m 2-Pack
- Pronomic J4RC-1.5 Audio Cable Stereo 6.3 mm Jack/RCA 1.5 m
- Pronomic Stage JM2JS-1.5 Audio Cable 3.5mm Stereo Jack / 2x 6.3mm Mono Jack 1.5m Black
- Proel CR202BLKM 2U 19" Rack Case 45 cm
Specification
- Product number 00083665
- Number of channels 4
- Colour Black
- Height in U 1.5 U
- Power (Watts) 3600
Reviews
| 5 Stars |
|
6 |
| 4 Stars |
|
0 |
| 3 Stars |
|
0 |
| 2 Stars |
|
1 |
| 1 Star |
|
0 |
A verification of the ratings has taken place as follows: Only customers who are registered in our online store and have actually purchased the product from us can submit a rating for the item in the customer account.
This rating has been translated automatically. Original language
I think it's great that it has a built-in crossover at 100Hz crossover frequency, which works great.
You can bridge the input channels and save yourself a splitter or a Y-cable, so the power amplifier runs for my mobile DJ sets without much additional effort.
In terms of performance, I have to say that it also delivers a lot of power. I put the power amp in a 3U plastic rack with an installation depth of 40 cm and a so-called 1U front panel from somewhere else to connect my connections (except power cables) from the front.
that you can walk up a flight of stairs without your tongue hanging out like I have experienced with other stages over 60.
This means that you can also operate many configurations of loudspeakers. For me it is only important that the bass range runs with 4 ohms in the tops it is less relevant, as the power requirement is lower.
Super price-performance ratio which I can recommend, especially in the mobile sector.
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
The test run with 2 18 mm subs and 2 15 mm speakers went well.
Let's see when the system is fully installed....
So far, I'm thinking about buying a second one.
This rating has been translated automatically. Original language
Variant Pronomic MC6-400 Power Amplifier 6x 600 Watt
This rating has been translated automatically. Original language
The sound of the mc6-400 is much better than expected, even better than that of the old iron pigs, the power is more than sufficient and even after longer sessions the amp only gets a little over hand warm. Perfect! That's how I imagined it.
The fan noise doesn't bother me at all, you can only hear it when the room is quiet, but when is it ever....?! ;-)
Greetings DJ-Ka6cr
Questions about product
No questions have yet been asked about this article.
Financing
easyCredit Ratenkauf
- 2 to 60 months term
- Financing from 22,00 € / month
- More information about installment purchase
ConsorsFinanz Finanzierung
- 6 to 72 months term
- 0% financing for 29,08 € per month
- More information on financing
| Operating instructions / manual |
| 3 Year warranty | |
| 30 Day Money Back | |
| Price Match Guarantee | |
| Over 2.000.000 satisfied customers |
The hotline is currently not manned. You can reach us again on Monday, 20.07.2026 at 09:30.
| Monday | 09:30 - 18:00 | |
| Tuesday | 09:30 - 18:00 | |
| Wednesday | 09:30 - 18:00 | |
| Thursday | 09:30 - 18:00 | |
| Friday | 09:30 - 18:00 | |
| Saturday | 09:30 - 13:30 |












