LED Tubes With High Light Output And Low Power Consumption!
Compared to conventional fluorescent tubes, Showlite LED lamps deliver excellent light output at significantly lower costs.
Fluorescent tubes, commonly referred to as neon tubes, are found almost everywhere in our daily environments today — in offices, warehouses, workshops, and more. A neon tube consumes a lot of power especially when switched on and it also takes a long time to reach full brightness, which makes it completely unsuitable for short-term use. On top of that, they are filled with environmentally harmful gases and mercury, which makes disposal cumbersome. Regular replacement intervals also incur additional maintenance costs.
Why Showlite LED Fluorescent Tubes Are the Better Choice!
Showlite LEDs light instantly with no switch-on delay. They are resistant to frequent switching on and off. Flicker and the slow warm-up you get with conventional neon tubes are eliminated with Showlite LED tubes.
Thanks to the extremely long service life of more than 50,000 hours, replacement intervals — and therefore maintenance costs — are reduced significantly. That also protects the environment, since the service life far exceeds that of conventional neon tubes. The consistently bright, flicker- and glare-free light does not cause fatigue even during extended use.
New Energy Label 2021
Since September 2021 the new energy label also applies to light sources; it no longer uses classes like "A+++" and now ranges from "A" to "G". It should be noted that no current device reaches the "A" or "B" classes. These new classifications were deliberately designed with the future in mind so they should still be practical in 10 years' time.
This means that devices with an energy efficiency class of "F" are comparable to the old "A+" class. Of course, the devices' power consumption has not increased as a result.
Simply Replace Existing Fluorescent Tubes!
Each tube is supplied with an LED starter, so installation in standard fittings is straightforward. During installation you only need to replace the existing starter with the supplied starter. Installation instructions are included.
Color Temperature: Daylight White 4500K!
The Daylight White tone is especially suitable for providing excellent lighting conditions in workrooms, offices, basements, garages, and storage areas.
With the Showlite LED fluorescent tube you can achieve the following power savings compared to standard fluorescent tubes; the exact value depends on the ballast used:
Standard fluorescent tube and ballast: 58 Watts + 8 to 12 Watts (loss power depending on ballast type EVG/KVG)
Showlite LED Tube T8W24K45F-1500: 24 Watts
This corresponds to an energy saving of over 60%
Save Energy And Money With The Latest LED Technology!
Features
- Free of IR and UV light
- Length: 1500mm
- Diameter: 26mm
- 144 LEDs
- Base: G13/T8
- Brightness: 2300 lumens
- Beam Angle: 120°
- Color Temperature: 4500K (daylight white)
- Power: 24W
- Housing Material: Aluminum
- Cover: matte (milky)
Scope of delivery
- 2 x 1500 mm LED tube
- 2 x LED starter
- 2 x installation instructions
Specification
- Product number 00038302
- Bulb holder T8
- Colour White
- Light source power (Watts) 24
- Illuminant LED
- Colour Transparent
Reviews
| 5 Stars |
|
12 |
| 4 Stars |
|
0 |
| 3 Stars |
|
0 |
| 2 Stars |
|
0 |
| 1 Star |
|
0 |
A verification of the ratings has taken place as follows: Only customers who are registered in our online store and have actually purchased the product from us can submit a rating for the item in the customer account.
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
This rating has been translated automatically. Original language
The installation is quite simple and safe (even for laymen) to manage.
Thanks to the included replacement starter, which is electrically only a jumper wire, no conversion inside the neon tube fitting is necessary.
However, I myself have completely removed the ballasts, the starter sockets and the suppressor capacitors from my double tube socket, as these are technically absolutely unnecessary and only represent further - albeit minor - power consumers.
The supplied operating / installation instructions are clear and concise.
If you wire the sockets as suggested, the direction in which the LED tubes are inserted doesn't matter at all, as there is also a jumper wire at the second end of the tubes that closes the circuit.
However, due to the removal of the old "innards" (ballasts, etc.) one or the other connection cable may be too short and must then be additionally extended.
However, it is sufficient to connect only one side of the neon tube socket (one pole to the neutral [N], one pole to the phase [L]) if you want to keep the wiring simple and don't want to make a big effort during the conversion.
This is the simplest variant, but the end of the LED tube on which the letters N and L are applied to the pin base must be used. This fact should not be forgotten if you want to change the LED tube after many years. If you insert it the wrong way round, it will remain dark.
Of course, this advanced conversion may only be carried out by a trained electrician.
Incidentally, the bulbs were safely packaged and shipped super fast.
Kirstein has here a very great environmentally friendly product in sales.
I am very satisfied with it.
Christian Neunteufel
from A-6850 Dornbirn
Questions about product
No questions have yet been asked about this article.
