Showlite LDO-10 MKII FS LED DMX Operator + Footswitch Dual Set

Universal LED DMX Operator, Also Ideal for Permanent Installation!

The Showlite LDO-10 MKII FS DMX Operator makes controlling LED spotlights on small stages, events or clubs incredibly easy. With the two compact mixers, you can directly and simply control 4 different spotlights or spotlight groups each – manually or with the footswitch. The LDO-10 MKII FS allows you to adjust individual colors via special color knobs with 12 different colors and the respective brightness sliders. Solo entertainers, solo musicians, and smaller bands especially benefit from this easy-to-use lighting mixer, as no lighting technician is needed anymore.

Control & Faders

With the DMX control, 12 preprogrammed or custom chase programs can be played automatically or music-controlled. Simply activate the automatic or music control function and the preprogrammed or self-created chase will play automatically or synced to the music. The overall brightness of the chases can be easily adjusted via a separate master brightness control as desired.

To avoid color transitions looking too "choppy," the fade control ensures smooth transitions between color changes. A built-in strobe function with speed control completes the package.

Fixture Selector Switch

The built-in 6-way DMX fixture selector switch lets you use the Showlite LDO-10 MKII FS not only for Showlite LED DMX spotlights but is compatible with nearly all LED DMX spotlights (e.g. Eurolite, ADJ, Cameo or Involight). Simply move the DMX fixture selector switch to the desired spotlight setting, where "R" stands for red, "G" for green, "B" for blue, "D" for dimmer (brightness) and "W" for white. For Showlite spotlights, the DRGB setting is used, for example.

The Showlite LDO-10 MKII FS DMX Operator is preprogrammed for up to 4 DMX LED spotlights. Of course, you can also use 8 or more spotlights and simply divide them into groups of four. This perfectly solves the common standard setup for medium-sized bands with 4 spotlights on the left and right each.

The new MKII FS version not only features a footswitch connection but is now compatible with significantly more lighting systems, e.g. Showlite LB and Eurolite KLS.

DMX Test / Simple Mode

The four sliders and the strobe/speed rotary control of the controller always additionally send DMX values 0-255 on channels 71 to 75 independently of all other settings (depending on the control position). This lets you test the response or channel assignment of any DMX device even without its manual. Simply select start address 71 on the DMX device and then move the four sliders and the strobe/speed rotary control. This mode also serves to control any DMX devices where you want to use five consecutive channels.

Installation is as simple as it is brilliant!

Simply connect the desired spotlights to the Showlite LDO-10 MKII FS controller, assign the appropriate DMX address to each spotlight (1, 17, 33, 49 or in 3-channel mode 1, 4, 7 and 10), turn on the Showlite LDO-10 MKII FS and you’re good to go. If the LDO-10 MKII FS is always used in the same place, such as a bar or club house, it is ideal for permanent wall installation. There are two mounting holes on the back for this purpose.

Both Hands Free for the Show!

The FS-10 Footswitch lets you conveniently control the most important functions of the LDO-10 MKII FS.

Function

The principle is simple: The "Auto" button starts the currently selected chaser on the DMX controller. It doesn’t matter whether a user or self-programmed chaser is used. The "Music" button activates the internal microphone of the LDO-10 MKII FS and makes the stage lighting "move" to the rhythm of the music. The "Blackout" button finally switches the light completely off. Each of the three buttons has an LED, so you know which function is active and can find the switch more easily even on dark stages.

Robust Construction

To keep the sturdy steel footswitch firmly in place, it stands on 4 non-slip rubber feet. Its relatively high weight of 740 g ensures it won’t slide across the stage even if accidentally bumped. With a Y-cable, you can even operate 2 controllers simultaneously.

Cables

The Y-adapter cable splits the signal into two lines and sends it via the 3-meter cables to the two lighting mixers. One foot – two controllers!

The perfect companion for solo entertainers, solo musicians and smaller bands!