Pronomic SPS-1S Speaker Tripod Steel SET with Case

  • Pronomic SPS-1S tripod, speaker tripod of steel, stable three foot construction, additional bracing
  • Large clamping bolts for fixing, safety splint with nylon strap
  • Extends from approximately 120-193 cm, load capacity: max. 40kg weight: 5.5 kg color: Black
  • Tripod Bag for 1 or 1-2 speaker or microphone tripods, water-resistant, tear-resistant material, sturdy zipper, reinforced carrying strap
  • max. tripod Length: about 107 cm, height: 16 cm, width: 12 cm, color: black
Pronomic
Variants (2)
Pronomic SPS-1A Speaker Stand Aluminum SET with bag
Pronomic PLC-1S speaker stand steel 2x Set with bag
Pronomic SPS-1A Speaker Stand Aluminum SET with bag Pronomic SPS-1A Speaker Stand Aluminum SET with bag Pronomic SPS-1A Speaker Stand Aluminum SET with bag
Pronomic SPS-1A Speaker Stand Aluminum SET with bag
  • Pronomic SPS-1A stand, aluminum speaker stand, stable, extra-wide tripod design, additional bracing
  • large clamping fixing screws, safety pin with nylon band, flange diameter 35 mm
  • extended from about 125 to 185 cm, capacity: max. 60 kg, weight: 4.8 kg, Colour: Black
  • Stand bag for one speaker or 1-2 microphone stands, water-resistant, tear-resistant material, stable zipper, reinforced carrying strap
  • max. Stand Length: about 107 cm, height: 16 cm, width: 12 cm, color: black
44,06 
36,60 €
Pronomic PLC-1S speaker stand steel 2x Set with bag Pronomic PLC-1S speaker stand steel 2x Set with bag Pronomic PLC-1S speaker stand steel 2x Set with bag
Pronomic PLC-1S speaker stand steel 2x Set with bag
  • Steel speaker stand, stable tripod construction
  • Additional bracing, large clamping screws for mounting
  • Safety pin with nylon tape, extendable from about 120-193 cm
  • Load capacity: max. 40 kg, weight: 5,5 kg
  • Color: Black, set including transport bag
68,76 
53,70 €
-22,5 %
42,96 

Free shipping (DE) inkl. VAT.

In stock - immediately available
Delivery time 1 - 3 days
or
Delivery on Thursday, 23.09.2021, if you order within  19 Hrs. 44 Min. with Express delivery.
Product number: 00034910

Speaker tripods made of stable steel!

Fixed stands for PA speaker must not necessarily be expensive. The new speaker tripods from Pronomic are the best proof thereof...

These practical tripods guarantee a secure positioning of your speakers with their stable tripod design, whether on stage, in the rehearsal room or in nightclubs.

Various adjustment possibilities guarantee a maximum positioning flexibility with the addition of an additional metal splint, which is secured with a nylon strap to the tripod, thus ensuring additional protection against the accidental falling of the speaker.

Pronomic stands for professional quality, well thought-out design and perfect sound at an absolutely low-budget price!

Durable bag for speaker stands or microphone stand!

Live Appearances mean you need maximum load requirements for the equipment you use. Tripods are frequently affected by this stress of weight and bulk. The new Pronomic carrying case protects your tripods and also protects the rest of your equipment from scratches during transport!

The Pronomic tripod bag is made of water-repellent, tear resistant material and provides optimal protection for one to two microphone stands or a speaker stand. A sturdy zipper and reinforced shoulder strap provide comfort for them while in transit.

Pronomic stands for professional quality, well thought-out design and the perfect sound for a really low-budget price!

Specification

Design Stand
Colour Black

Reviews

4.9/5.0
Based On 22 ratings
Show all reviews
5 Stars
21
4 Stars
0
3 Stars
1
2 Stars
0
1 Star
0
Solid and good but with a little skepticism
Review from Manfred on 02.07.2018
This rating has been translated automatically. Original language flag from
 verified purchase
Here comes a very cleanly processed speaker stand, which is also solid and not wobbly thanks to steel design. The tubes have a powerful diameter, which does not allow a swaying even with box weight. The telescopic tube with a diameter of 35 mm is designed for standard speaker flanges and can be extended to a height of 193 cm. To secure the telescopic tube, holes are made and the tube is first secured by a pin hanging from a strap, then the star grip is turned to clamp the tube so that it sits without play. This clamping is done via a uf em Unterror sitting plastic clamp, in the form of a clamp. Here comes a little skepzisch on, since I have no reference to the used synthetic material and I already at other systems with clamp breakage experienced ...... one does not know what the Chinese use there so. Should not be bad, but therefore tighten the clamp sensitively ..... is enough. The same can also be found on the tripod, again the clamp clamping, so tighten just as sensitive, this is also enough against adjustment. The tripod stands with horizontal adjustment of the struts with approx. a Ø of 1 m and thus super tilting stable. As a conclusion, plastic caps are plugged on as feet.
Overall, I attribute the tripod a solid and good execution, except for the skepticism in the clamp clamping from the undefined plastic ( eg the specification ABS says "unbreakable").
Tube clamping is solved better with McGrey with pressure pieces, for example.

Included with this tripod is a simple synthetic fabric bag (no material specification), which is sufficient for two tripods. Great idea, but if you then consider the total price (to equivalent alternatives), then the bag must also be paid accordingly.
The bag has a relatively short zipper at one end of the bag. Inside the bag there is also a partial strip, intended for separation and protection when used with two tripods. This strip is sewn lengthwise and can be attached with Velcro at the front. The Händling to put in the Staive is quite cumbersome and the separation strip does not contribute to the simplification with.
So, here one wishes then nevertheless a continuous zipper, so that one can put in the tripod(s) simply and then pulls the zipper. The bag itself is 'ne number too long turned out, thus also undefined schlabberig. The carrying straps are also advantageously placed around the bag for reinforcement, but not in the direction of pull, the end rivets will probably not be for eternity.
Conclusion for the bag ....... you should work on it again (see Rockbag).
Excellent
Review from MICHELA on 23.01.2018
This rating has been translated automatically. Original language flag from
 verified purchase
Product well packaged. Arrived quickly, good value for money.
Speaker stand SET
Review from Josef on 25.10.2017
This rating has been translated automatically. Original language flag from
 verified purchase
Order process smooth, fast delivery, price ok, goods perfect. Gladly again.
me gusta
Review from Hugo on 04.08.2017
This rating has been translated automatically. Original language flag from
 verified purchase
All correct, fast shipping '...................
Fast and good
Review from Thomas on 26.07.2020
Variant Pronomic PLC-1S speaker stand steel 2x Set with bag
This rating has been translated automatically. Original language flag from
 verified purchase
the stands have arrived quickly and in decent condition with me. The price is also in order. The processing is good. also the accompanying carrying bag makes a stable impression. Gladly again, but I probably do not need anything more.

Questions about product

No questions have yet been asked about this article.

Your question about the article Pronomic SPS-1S Speaker Tripod Steel SET with Case

Your question will be forwarded directly to the department and answered as soon as possible.

I agree that my question and my name will be posted on this page, provided this information is useful to other customers. A revocation of my consent is possible at any time with effect for the future.

Variants

Accessories

Customers also bought