Showlite LDO-10 MKII FS LED DMX Operator - Return (Condition: Very Good)

Universal LED DMX Operator Ideal for Permanent Installation!

The Showlite LDO-10 MKII FS DMX Operator provides effortless control of LED fixtures on small stages, events or in clubs. The compact console lets you control 4 different fixtures or fixture groups directly and simply—manually or with an optional footswitch. With the LDO-10 MKII FS you can set individual colors via special color rotary controls offering 12 different colors each, together with the corresponding brightness sliders. Solo entertainers, solo musicians and smaller bands especially benefit from this easy-to-use lighting mixer, as no lighting technician is required.

Control & Faders
\r\nWith DMX control, 12 preprogrammed or custom chase programs can be played automatically or music-controlled. Just enable the automatic or music mode and the preprogrammed or self-made chase will run automatically or in time with the music. For easier operation on stage, the new version can even be expanded with a footswitch. The overall brightness of the chases can be easily adjusted via a separate master brightness control.

To avoid abrupt color changes, the fade control provides smooth transitions between color changes. A built-in strobe function with speed control completes the feature set.

Fixture Selector Switch
\r\nThanks to the built-in 6-way DMX fixture selector switch, the Showlite LDO-10 MKII FS can be used not only with Showlite LED DMX fixtures but is compatible with almost all LED DMX fixtures (e.g. Eurolite, ADJ, Cameo or Involight). Simply set the DMX fixture selector switch to the desired fixture setting, where \"R\" stands for Red, \"G\" for Green, \"B\" for Blue, \"D\" for Dimmer (brightness) and \"W\" for White. For Showlite fixtures, for example, the DRGB setting is used.

The Showlite LDO-10 MKII FS DMX Operator is preprogrammed for up to 4 DMX LED fixtures. Of course you can also use 8 or more fixtures and simply split them into groups of four. This provides an ideal standard solution for mid-sized bands using four fixtures on each side.

The new MKII FS version not only offers a connector for a footswitch but is now compatible with many more lighting systems, e.g. Showlite LB and Eurolite KLS.

DMX Test / Simple Mode
\r\nThe four sliders and the strobe/speed rotary of the controller always send DMX values 0-255 on channels 71 to 75 independently of all other settings (depending on control position). This way you can test the response or channel assignment of any DMX device even without its manual. Simply set the start address to 71 on the DMX device and then move the four sliders and the strobe/speed rotary. This mode also serves to control arbitrary DMX devices where you want to use five consecutive channels.

Installation Is As Simple As It Is Brilliant!
\r\nJust connect the desired fixtures to the Showlite LDO-10 MKII FS controller, assign the appropriate DMX addresses to the individual fixtures (1, 17, 33, 49 or in 3-channel mode 1, 4, 7 and 10), switch on the Showlite LDO-10 MKII FS and you're ready. If the LDO-10 MKII FS is used permanently at the same location, e.g. in a bar or clubhouse, it is ideal for fixed wall installation. There are two mounting holes on the back for this purpose.

The Perfect Companion for Solo Entertainers, Solo Musicians and Smaller Bands!